
Morris Bean & Company’s current aluminum casting production has its roots at Antioch College, and is named for the physics student who managed the foundry before incorporating it as an independent business in 1946. (Submitted photo)
At 80, Morris Bean casts ahead
- Published: November 18, 2026
On the foundry floor at Morris Bean & Company last week, one worker polished a core that would shape the interior of a casting. Another had just finished casting a batch of large, fan-like impellers, impossibly heavy and still steaming in their molds.
Elsewhere across the large industrial space, flames bloomed and heated tooling. President and CEO Brian Roos made the rounds through the space as he led the News on a tour, greeting employees and tracing the foundry’s various processes from nearly beginning to end.
He summed up the ethos that has kept the local industrial company running for decades.
“We do anything that’s low-volume and difficult to cast,” he said.
This year marks 80 years since Morris Bean became an independent, incorporated business. It’s one of Yellow Springs’ few surviving industries, producing complex aluminum components for a variety of applications, including industrial cooling systems and pumps.
“We do a lot of impellers,” Roos said, referring to rotating components with blades or vanes that move fluid or gas through a pump. He pointed to a display of aluminum shapes set against a table, where impellers of a variety of sizes were lined up.
“The open ones are generally turbochargers for maybe locomotive engines or some big engine; the smaller, shrouded ones are a lot of times for HVAC applications,” he said, and pointed to a large impeller, nearly the height of this reporter. “The cooling capacity of an HVAC unit for your house is maybe two to four tons of refrigeration … this is probably [for] a 6,000-ton unit.”
The company’s roots stretch back a few decades further even than this year’s anniversary, to its initial founding at Antioch College. Then-President Arthur Morgan famously supported college-owned, student-managed industries as part of the institution’s educational mission, which spawned a number of businesses that would find a home in the village — Vernay Labs, Antioch Publishing Co. and YS Instruments among them — and bolster the local workforce.

Morris Bean & Company celebrated its 80th anniversary in April this year. Pictured are current and former employees at an anniversary open house earlier this year. (Submitted photo)
The foundry started in a barn near present-day Birch Hall in the mid-1920s; according to a history provided by the company, Morgan “realized that the art of plaster casting of nonferrous metals had not kept pace with scientific progress.” Morgan appointed three students to run the foundry, each of whom soon gave up the effort; it was physics student Morris Bean who ultimately stuck it out, becoming co-op manager of what was then Antioch Foundry in 1928. Working with artist Amos Mazzolini, Bean “advanced the art of making bronze castings,” the history notes.
The early bronze work expanded into research on aluminum tire molds, supported by Goodyear, five years after Bean graduated and became the foundry’s full-time manager. The next year, the foundry had grown enough to move to larger digs on Corry Street — the present location of the Foundry Theater.
In 1940, General Motors bought the foundry, and production during World War II included aluminum castings for airplane engines. When General Motors moved to close the operation after the war, Bean and his associates, along with a cadre of community members, purchased the foundry, and on April 1, 1946, the Antioch Foundry became Morris Bean & Company. The business moved to its current location on Hyde Road four years later.
The company’s technical development, and its ultimate longevity, owe a lot to Xarifa Bean, Morris Bean’s wife. An Antioch mathematics graduate, she led the company’s research and development for 39 years. Making the rounds on the production floor, Roos credited her with developing the Antioch plaster process. Most of the company’s products are cast in sand molds, which Roos said is typical within the industry, but the Antioch plaster process produces ultra-smooth molds with little surface resistance — a particular draw for aerodynamics customers, Roos said. Though sand molds, too, yield a smooth finish, the difference between those and Antioch plaster is evident at the touch of a fingertip.
“As far as we know, we’re the only foundry using the Antioch plaster process,” he said. “The most common plaster process is self-curing; the Antioch plaster goes through a series of autoclaves, rehydrators and dehydrators and gives our customers a really good surface finish.”
Roos also pointed to the work of dipping and then individually polishing aluminum cores — a practice he linked to the Beans’ foundational expectations around attention to detail.
“You can get 80% of the way there just by dunking the core and setting it on the rack,” he said. “But we always want that extra 20%.”
A hefty portion of the foundry’s work involves making something that will inevitably be destroyed. Sand mixed with a binder forms molds and cores that shape a casting’s exterior and internal passages. Once the aluminum solidifies, workers break away the surrounding mold, and later, heat burns the binder out of the sand inside a casting’s delicate passageways, allowing it to fall free without damaging the metal.
In one area, nitrogen pressure routinely pushes molten aluminum up through a ceramic tube, filling a mold from below — a practice Roos said was adopted for ideal control and precision. Elsewhere on the floor, Roos described vessels used to pour larger castings as “giant tea kettles.” The foundry can pour aluminum castings weighing up to 4,000 pounds, he said. Computed algorithms simulate pours before casting begins, but trained hands and eyes remain the company’s essential asset. At a finishing station, an employee removed excess metal from an impeller, refining the passages between its blades. Completed products undergo inspections that use black light to reveal surface defects, precision measurement equipment used to verify that cast parts meet customers’ specifications and X-rays to check for unseen potential defects inside.
“Everything is essentially craft manufactured,” Roos said.
Keeping that craft approach in focus, he added, required Morris Bean about a quarter century ago to move away from competing on price for high-volume work and concentrate on specialized, smaller orders. A typical order might be five pieces a week, and the largest about 30 pieces; some customers need just one casting, ever.
“What is the niche that will support American craft manufacturing, and what does that look like?” Roos said of the thinking behind the company’s shift. “I mean, there’s a lot of our competitors that if you came and said, ‘I only want 1,000 castings,’ they’d be like, ‘Oh, well, that’s not worthwhile.’ … Our favorite customer is one that comes to us and says, ‘This other foundry said they can’t do it, but we should go talk to Morris Bean.’”
The mid-sized, craft niche worked well for Morris Bean for two decades, with the company employing about 115 people up to 2020 — some from Yellow Springs, more from nearby Springfield and Xenia. But as with many industries, the COVID pandemic brought disruption, as supply-chain problems prompted some major customers to move to acquiring castings from closer to their overseas manufacturing operations.
“So we lost a lot of our impeller business due to COVID proving that the supply chain was not stable,” Roos said, adding that production of those parts remains below half of pre-pandemic levels. Lost work also meant a reduction in available jobs; at present, Morris Bean employs about 65 people.
Hourly workers at Morris Bean are represented by the United Steelworkers union; employees can bid on posted jobs based on seniority, with the company paying for training, including outside instruction for maintenance, welding and testing positions. Roos estimated that about half the employees currently on staff have worked at Morris Bean for more than a decade; Human Resources Manager Tricia Oldiges said multiple employees have retired with more than 50 years of service.
Roos himself started as an engineering technician in 2005 and became president in 2018. Looking ahead to the next two decades, Roos said he wants to rebuild the company’s workforce to pre-pandemic levels and broaden the company’s customer base by positioning the foundry to serve other specialized aluminum casting markets, shedding a brighter light on the Morris Bean name.
“I think in the industry we’re thought of as ‘the impeller people’ … but we’ve had a tendency to keep our head down and our mouth shut,” Roos said, reflecting on the company’s history. “We went from higher-volume automotive; we did some iron casting; we’ve done the impellers for a long time. Right now, we’re kind of like, ‘OK, what’s next?’ We want to position the company to support any kind of niche-market American aluminum casting needs, in whatever industry that is. How do we diversify the people that are aware of us, and what we can provide?”
Morris Bean’s history remains present in some of its current processes, but perhaps the most visible marker of its long years of work remains in its storage of tooling patterns — a vast, physical archive of past work on shelves stretching back, row after row. The company holds onto the patterns, just in case a customer needs access to them again in the future. An aging unit somewhere in the U.S. may yet require another impeller, after all.
“We’ll occasionally go through a list of patterns we haven’t touched in a decade and [reach out] to customers,” Roos said. “If they write back and say, ‘Yeah, there’s still an air conditioner operating in Houston that we may need an impeller for,’ we say, ‘Alright, we’ll hang onto it.’”
Recently, Roos said, the foundry revisited a job whose last shipment went out in 1984. It still had the pattern.
The Yellow Springs News encourages respectful discussion of this article.
You must login to post a comment.
Don't have a login? Register for a free YSNews.com account.













No comments yet for this article.